How To Change Travel Trailer Tire

Last Updated on October 19, 2022 by Douglas

There are a few things to keep in mind before you attempt to change your own travel trailer tire. The first thing is that the spare tire should be inflated, and the lug nuts should be removed. You will also need a jack and a lug wrench.

The first step is to place the jack under the trailer frame. Next, raise it until it is level with the ground. Then, loosen each of the lug nuts by turning them counterclockwise with your fingers or by using a socket wrench. Once all of them are loose, remove each one with your hands or pliers and set them aside in a safe place where they won’t roll away or get lost.

How do you change a trailer tire by hand?

Remove the Tire. With the tire safely in the air, reach in and remove the lug nuts you loosened earlier. Inspect the Wheel Hub. Put the New Tire in Place. Add the Lug Nuts. Lower the Tire. Tighten the Lug Nuts. Clean Up.[1]

Where does the Jack go on a travel trailer?

Place the jack under the frame just behind the rear axle (never on the axle itself or any of the vehicle’s suspension components).[2]

Can you use RV leveling jacks to change tires?

Note: Leveling jack manufacturers advise not to use leveling jacks to change a tire, or to do any type of service or maintenance under the trailer when the jacks are the only support. Never lift all the tires off the ground without blocking, or jacks to support all the weight of the trailer.[3]

Can you jack up a travel trailer by the axle?

Do Not jack it up on any part of the axle tube as your camper is a torsion style axle and could be damaged. The use of jack stands is always a could safety practice.[4]

Do travel trailers come with a tire jack?

Every travel trailer has a jack. Whether you get a manual one or an electric one is really just personal preference.[5]

How do you lift a travel trailer?

One common way to lift your trailer is by “flipping” your axles. Flipping your axles just means moving your suspension from below the axle (standard, “underslung” springs) to above the axle (“overslung” springs) in order to create more clearance between the underside of the trailer and the road.[6]

What size jack do I need for a travel trailer?

The required weight capacity of tongue jack is determined by calculating the tongue weight of your trailer. The rule of thumb for a boat trailer is 7-10% of the weight of your fully loaded trailer. If you have a 6000lb loaded trailer, using 10% as an example, you would require a tongue jack with a capacity of 600lbs.[7]

Is it hard to change an RV tire?

While it may be intimidating to think about changing a tire on an RV, it’s really not much more involved than changing a tire on a car. Just like any other emergency, the best advice is to prepare before a crisis happens. Everything else, you can handle step by step.[8]

How many years do travel trailer tires last?

Time Considerations The common rule of thumb for changing your RV tires is anywhere between three and six years. If you are on the road often, and you think your tires need to be changed, then it may not be possible to last as long as six years.[9]

How do you change a flat tire on a dual axle travel trailer?

Make sure your trailer is secure. Loosen the lug nuts on the faulty tire. Set up the jack under a secure location. Use the jack to raise the trailer enough to remove and replace the tire. Finish taking off the lug nuts from the faulty tire.[10]

Should wheels of RV be off ground when auto leveled?

Expert Reply: Your leveling system is not supposed to lift the wheels off the ground; this could exceed the capacity of your leveling system and cause damage and I do not recommend doing so.[11]

Do travel trailers have self leveling jacks?

Travel trailer owners can now enjoy the same easy one-touch automatic leveling that is available for motorhomes and 5th wheels. Many travel trailers now are equipped with slideouts which require your travel trailer to be level and stable in order to operate efficiently.[12]

Leave a Comment