Last Updated on October 14, 2022 by Douglas
Repairing the interior walls of a travel trailer is a relatively simple process. The first step is to remove any debris from the walls and floor. Next, clean the surface of the wall with soap and water. After that, apply vinyl patching tape to the damaged area, then cut out a square of vinyl repair panel that is slightly larger than the area being repaired. Apply pressure to both sides of the vinyl panel until it sticks firmly to both surfaces. Finally, use a razor blade or utility knife to trim away excess material from around the edges of patch.
What to use to fill holes in RV walls?
You can use drywall mesh for large holes or fill in holes in fiberboard. For wood and vinyl, a spackle or foam insulation will do just fine. To start, clean the edges of the hole and remove any looks debris or fibers. If necessary work some sandpaper into the hole and smooth out the edges all the way around.[1]
What can you use for camper walls?
Interior wall options for RVs and trailers RV interior walls and ceilings are typically outfitted in one or more of a variety of materials, including plywood, MDF (medium-density fibreboard), wood paneling, and plastic laminate paneling.[2]
Can you spackle RV walls?
If there’re any nail or screw holes that you want to get rid of—or sections of wallpaper or even wall missing—use a joint compound or spackle to fill them in. These can be sanded to become even with the wall before painting. If you find areas where the wallpaper is loose, use a wallpaper paste to glue them down.[3]
How do you repair a hole in aluminum RV siding?
Luckily, small holes in aluminum siding don’t require welding and a fairly easy patch job. You can create an aluminum patch by cutting a piece of aluminum sheet to fit over the damaged area. You can find these sheets in most hardware stores and some specialized RV parts shops.[4]
What are the walls made of in a travel trailer?
RV walls are made out of 1 of 3 materials – plywood, medium density fiberboard (MDF), or vinyl. Depending on which material your RV interior walls are made of, you will have different things you can do in terms of hanging items on the wall or painting your walls a different color.[5]
What kind of wood is used in travel trailers?
Recreational vehicle (RV) manufacturers use APA trademarked plywood and OSB (oriented strand board) structural panels in motor homes and mini-homes, in travel trailers, fifth-wheel trailers and tent trailers, in vans, pickup campers and all kinds of special-order, custom-made and converted units.[6]
How thick are the walls in a travel trailer?
How thick are RV interior walls? Most RV walls are around 2-21/2 inches thick.[7]
Do travel trailers have load bearing walls?
Do RVs have load bearing walls? RVs do not have load-bearing walls but a wall may have been put in place to reduce flexing in the RV. Extra care needs to be taken before you consider tearing down an interior wall. Interior walls may have vital components inside of them that you’ll want to avoid damaging them.[8]
How do you screw into an RV wall?
#1: Screws and Nails Use the smallest screws or nails you can get away with. Long enough to hold the item in place, but hopefully not so long that they will damage anything behind the wall. Pre-drill the holes. By pre-drilling a hole in the wall, you will prevent the screw from cracking the wall as it goes in.[9]
Can you fix stripped screw hole?
Cut some thin strips or shavings from a piece of scrap wood from the same (or similar) species of wood. Dip the tips of the strips into wood glue and tap them lightly into the hole with a hammer until the hole is filled. Let the glue dry for a few hours.[10]
Do you have to sand RV walls before painting?
Sand the walls – you don’t have to go crazy, but scuffing up the walls a bit will help the primer adhere. A sanding sponge would be easiest. Clean the walls – My recommendation for this would be TSP. It is a cleaner and degreaser made to use before painting, does an amazing job, and is dirt cheap.[11]
What paint is best for RV walls?
Oil-based paint is a very popular choice among RV owners because of its durability. It is also easy to clean and tends not to leave brush strokes during the painting process. Overall, it requires fewer coats than latex paint usually does.[12]