How to Troubleshoot Travel Trailer Lights

This article will give you a few helpful tips on how to troubleshoot your travel trailer lights.

Sometimes, it is difficult to know what the problem could be with your lights.

First, check the fuse box. If the fuse is blown or has been removed, replace it with a new one of the same amperage. If it’s not there, check for loose wires in the trailer’s plug and socket. The next step would be to contact an electrician or mechanic if you are not able to find a solution on your own.

If you are able to turn off and on your lights by flipping a switch then that means that there is nothing wrong with the wiring in your trailer’s plug and socket and only the light itself needs repairing.

What would cause trailer lights to stop working?

Possible causes: Burnt out light bulb causing a break in the system; corrosion in harness, light plug or pigtail; ground problem; hydraulic lock from too much dielectric grease; bad spot in wiring harness; issues in the 7-way plug; issues from the tractor.[1]

Do trailer lights have a fuse?

If you’re problem was turn signals then simply look for the trailer RT or LT fuse and simply replace if needed. This will solve the problem of brake lights also, as they are the same fuse.[2]

What fuse controls the running lights on a trailer?

The trailer running light fuse according to your owners manual is F29 and is a 20 amp blue fuse. You will also want to check the trailer tow receptacle fuse F30 which is a 30 amp pink fuse.[3]

Why do my brake lights work but not my running lights?

The most common reason why your tail lights are not working but brake lights are is due to a bad or wrong type of light bulb installed. It can also be caused by a blown fuse, bad wirings, or corroded sockets or plugs. A faulty control light switch could also be to blame.[4]

Why do my trailer lights work with one vehicle but not another?

Expert Reply: It could be a somewhat weak ground on the trailer that allows the lights to work with one vehicle but not with another. What you can try doing is running a ground wire from each of the light assemblies back to the main ground of the trailer.[5]

Will trailer lights work if not grounded?

Expert Reply: In some cases trailer lighting will ground through the hitch ball but that’s typically only if the actual ground circuit is insufficient. This is not an ideal setup. It needs to ground through the wiring of the trailer harness.[6]

How do I know if my LED is blown?

Connect the negative lead from the multimeter to the cathode (negative) lead on the LED. The LED should glow dimly, indicating it’s working. If the LED does not light, swap the connection to the LED leads. The LED should now light, if not the LED is faulty.[7]

Why are my LED lights failing?

Reasons often include a faulty power supply, loose connections, a faulty circuit design, or even damage due to water ingress caused by rain. Whatever the reason is for your LED lights not working and whatever the tell-tale signs are, there’s usually a solution to the issue.[8]

How do you check running lights on a trailer?

Press the brake, hazard lights, and both blinker lights while someone stands behind the trailer to see if all the lights are working properly. The lights on the trailer should correspond with the lights on the back of the tow vehicle. If some lights don’t turn on or are dim, take note of which ones are malfunctioning.[9]

Why do all trailer lights work except running lights?

If there is no signal on the wire here, then it is likely the wire is damaged somewhere along the trailer. Try tracing the wire as much as possible from the junction box to the taillights. If you are able to find the damage, replacing the damaged section of wire will complete your trailer’s running light circuit again.[10]

Are running lights and brake lights the same?

The main difference between tail lights and brake lights is that the former lights up as soon as the headlights are turned on, while the latter only engages upon stepping on the brake pedal. While both lights are red, brake lights tend to emit a more luminous red light.[11]

Is there a relay for tail lights?

Tail light relays are a vital part of any car on the road. Relays take out a manual aspect, or possibility for human error, in an electrical process. Tail light relays are linked to the headlight system of your car.[12]

Leave a Comment